C Arm 5-Aixs X-ray Inspection NDT Equipment
Fully Automated Die Casting X-Ray Inspection Machine
NDT X Ray Flat Panel Detector Equipment
Specifications & Parameters
1
What X-ray tube power (kV/mA) do your machines use?
We offer systems with a range of X-ray tube specifications:
Standard models (FSX-T160): 160kV / 5mA
High-power models (FSX-T225): 225kV / 3mA
Ultra-high power models (FSX-T450): 450kV / 3mA (for thick steel castings)
Micro-focus systems: 225kV / 2mA with 5-micron focal spot
Higher kV = deeper penetration. Higher mA = shorter exposure time. Our engineers will recommend the optimal specification based on your part materials and wall thicknesses.
2
What is the image resolution and magnification of your systems?
Our systems offer industry-leading image quality:
Geometric magnification: Up to 2-5x for standard systems, up to 20-30x for micro-focus systems
Spatial resolution: Down to 50 micrometers (0.05mm) with flat panel detectors
Pixel size: 50-139 micrometers depending on detector model
Software magnification: Up to 32x digital zoom with image enhancement tools
Higher magnification allows detection of smaller defects, but requires appropriate part geometry. Contact us to discuss your minimum detectable defect size requirements.
3
What is the maximum wall thickness your X-ray machines can penetrate?
Penetration capability depends on both the machine model and material type:
Aluminum alloys: Up to 60-80mm with our standard models, up to 150mm+ with high-power models
Magnesium alloys: Similar to aluminum
Zinc alloys: Up to 30-40mm (higher density)
Steel/iron: Up to 15-25mm (high density)
For a specific material and thickness, please provide details and we can confirm whether our equipment is suitable or recommend a higher-power model.